As you prepare to purchase a new metal roof for your home, use the checklist below to guide you to a contractor who will offer you the highest quality materials, installation and working relationship.

Is the company licensed?

Is the contractor licensed and registered with the state? Ask for a copy of the license.

Does the company carry Worker’s Compensation Insurance?

Make sure the contractor carries worker’s compensation insurance for the installation crew. This policy insures the crew that works on your property. If the company has no worker’s compensation insurance and a worker is hurt, you could be held liable and sued. If the company uses subcontracted 1099 workers those workers may not be covered by the contractor’s insurance.

Does the company use safety equipment?

Federal Law requires workers to use safety equipment including an anchor point, OSHA compliant safety line and lanyard. This policy is now required on all roofs by OSHA.

Does the company carry General Liability Insurance?

Get a copy of the General Liability insurance for the company. This protects you and would pay for any property damage in the case of an accident. There should be no open ended costs on the policy.

Does the company provide a “Written Estimate” or an “Exact Price Quote”?

A “Written Estimate” is essentially a written guess. Ask for an “Exact Price Quote” that has fixed cost per unit variables.


Make sure it is the company’s responsibility to securing the necessary permits.

Does the company have a physical location–an actual office/showroom?

Check to see if the contractor has a physical location other than his house. Visit their showroom and shop. The contractor should have a physical location dedicated to the business, not his house or apartment. If he does not have the money to rent a decent office, where will he get the money to make an expensive repair or replacement if there is a serious warranty issue caused by faulty workmanship?

Does the company have a bank reference letter?

This single document from the contractor’s bank will show you the financial stability and the bank’s judgment of character of the company you’re working with. Insist on seeing the letter, so you now that you’re dealing with a company that is stable and financially sound.

Does the company have a Supplier Letter?

This is a written communication from the supplier of the product that they use. These are easy to obtain from the supplier. If the contractor tells you otherwise, they may not be able to get the products they showed you and could be substituting an inferior product.

Does the company have references?

Get a complete list of references and check at least 4 of them out. Many people neglect to check the references. Do not make this mistake – you may be surprised at what you learn from past customers.

Are the members of the install crews employees?

Visit a work site and talk with the crew. Ask them if they are employees of the company. Check to see if the trucks and equipment have the company’s name on them. If not, they are probably subcontractors.

What is the company’s policy on changes to the agreed upon work?

Find out if the contractor uses written change order forms on all changes. Non-written change orders can lead to costly add-ons.

What is the company’s policy on changes to the agreed upon work?

Find out if the contractor uses written change order forms on all changes. Non-written change orders can lead to costly add-ons.

Does the company do a complete attic inspection as part of the sales process?

The contractor has done a thorough inspection to minimize future problems and costs. Looking at the surface of a roof is not adequate unless the contractor has x-ray vision. A thorough attic inspection is necessary and should include:


  • Ventilation Analysis – Interior attic inspection of ventilation. Your contractor should be trained in ventilation. Does he know what the minimum square inches of venting that code requires? You should have at least 144 square inches of
    venting per 300 square ft. of attic space for intake and the same for exhaust. This will help prevent mold, keep insulation dry and reduce heating and air conditioning costs.
  • Ventilation Inspection – Visual inspections of vents to make sure you do not have open can vents and gable vents used in conjunction with a ridge vent.
  • Moisture Inspection – Take moisture readings with a moisture meter. This will tell if you have a source of moisture which may cause future problems.
  • Infrared Temperature Evaluation – Check and record attic temperatures at the eave and ridge using an infrared heat gun.
  • Soffit Inspection – If the soffit venting is blocked, what are the solutions? Soffit is needed for intake of air.
  • Exhaust Venting Inspection – Inspection of the bathroom and kitchen exhaust vents to see they are venting properly through the roof or gable wall and not into a soffit.
  • Structural Inspection – Visual inspection of rafters and sheathing.
  • Heat Source Evaluation – Inspection of duct work and pipes in the attic that may cause heat build up and ice.

Does the company use permanent materials?

The contractor is using the appropriate materials. It is common place for a contractor to shave costs and the homeowner does not know.


  • Premium Ice & Water Shield – When a tear off is needed, premium non-granulated ice and water shield is needed 9 feet up from all eave edges, in all valleys and around all protrusions.
  • Woven Synthetic Underlayment – Woven synthetic underlayments installed with plastic cap nails, not staples.
  • Interlocking Starter – Interlocking starter for high wind certification.
  • Open Valleys – Open valleys that are self-cleaning. Closed valleys will allow ice to freeze around them and get ripped apart when snow and ice shift.
  • Baffled High Volume Ridge Vent – Baffled high volume ridge vents of 21 NFA (21 square inches of venting per lineal foot).
  • Premium Sealants – Premium sealants. Silicones will fail with modern ceramic finishes.
  • Non Corrosive Metals – Non corrosive metals such as aluminum or copper. Steel may be acceptable if you are not concerned about rust. Many unscrupulous contractors will try to get you to believe steel will not rust.
  • Energy Saving Finish – Look for heat reflective finishes such as Hi-R Kynar for maximum energy savings and longevity.
  • Hidden Fastener – Make sure all installation methods use hidden fasteners. Through fastened metal roofs with neoprene screws or rubber washers will fail and leak when the UV attacks the washer.
  • 4 Way Interlock – Metal roof panels should be 4 way interlocking so debris and wind cannot get under the panel. Unsightly debris collects on overlapped panels.
  • Permanent Finishes – Metal roofs should have finishes that are permanent. Many inexpensive steel products try to mimic asphalt by gluing granules to the surface. These granules will come off. If you are buying a granulated steel roof, make sure to get 5 pounds of granules per 20 square of roofing for aesthetic repairs. This is done by applying an adhesive onto the panel and sprinkling granules into the adhesive.

Does the company offer the following warranties to back your new lifetime roof?

          With An  LES you will receive two separate warranties.

  1. Material Warranty from the manufacturers.
  2. LES Workmanship Warranty for as long as you own your home. Limited to 5 years on commercial buildings.

What is the company’s reputation?

Does the contractor have Better Business Bureau complaints? Are there numerous stories on the Internet from unsatisfied customers? Contractors can be checked out at RipOffReport.com.

Does the company offer a “respect” agreement with sales associates?

Sales Associates sign an agreement to play no tricks or exert any pressure on any customer and to treat the customer with respect.

What are the company’s job clean-up standards?

Do all installers sign a written agreement pledging daily clean up of job site and a thorough clean up of the entire work area at the conclusion of the job.

What is the workers code of ethics?

All workers should sign a worker conduct compliance agreement.

What kind of training does the company offer for workers?

All installers should be certified by the manufacturer of the metal roof. Ask for certification.

Ready to get started?

Learn more about metal roofs


Get a free quote from us
Well, you have decided to opt for the most appealing, sturdy and non-inflammable metal roof for your home or any commercial places. Feel free to get a quote from us.

Schedule an Appointment Online Right Now!Schedule Online Now